Speedmaster 1-147-004 SBC LowRise Vortec Intake Manifold, Satin

Description

Very popular in street rods, engine swaps, or the industrial market, Manifold can be used on any Chevy V-8 engine utilizing the late Vortec head, Will fit Small Block Chevy w/ 1996+ Vortec Cast Iron Heads (Also fits Edelbrock E-Tec aluminum heads), It is the lowest profile manifold and is also the only one that is street legal on pollution controlled vehicles, Specially set up to accept a spread bore carb but comes with an adapter plate that permits the use of square bore carbs
Speedmaster 1-147-004 SBC LowRise Vortec Intake Manifold, Satin
Sku # 2561147004
Mfr. Part # 1-147-004
Condition
New
Brand
Speedmaster
Sold
Each
Details
Notes
This manifold has provision for external water bypass. It also features four corner water outlets, dual distributor holddowns, includes a square bore carb adapter and gasket, and will work with a late model style water neck, alternator, HEI, and air conditioning brackets. Will also fit 1996 and later Vortec engines with some minor modifications. The modification is not to the manifold itself. It just requires running a short section of heater hose from the pipe tapped hole in the front of the manifold to the 5/8" hose nipple on passenger's side of the water pump.
The 1966 and later Vortec blocks do not have a water bypass in the block and this hose takes care of that issue.
Info
This Speedmaster LowRise manifold is designed to fit engine swaps using the 1996 and later Vortec (Gen 1+) cast iron heads or the Edelbrock E-Tec aluminum heads. These cylinder heads are very popular in street rods, engine swaps, or the industrial market. This manifold can be used on any Chevy V-8 engine utilizing the late Vortec head.
The Speedmaster LowRise Manifolds are our lowest profile manifold and is also the only one that is street legal on pollution controlled vehicles. It is set up to accept a spread bore carb but comes with an adapter plate that permits the use of square bore carbs. To remain street legal with a square bore carb, you must use one that is also approved as street legal for your application.
Fits Small Block Chevy w/ 1996+ Vortec Cast Iron Heads (Also fits Edelbrock E-Tec aluminum heads)
Low Profile
Satin Finish
WARNING: Cancer and Reproductive Harm -- p65Warnings.ca.gov
California Customers: This part has been identified as emissions sensitive and can only legally be installed on race-use only vehicles, off-road-use only vehicles, or pre-1965 vehicles in the State of California in accordance with the California Air Resource Board (CARB) requirements. Once your order is placed you will be contacted by Speedway Motors within 2 business days so that you can certify that you will only use such parts on these types of vehicles in California.
Specs
Material Type
Aluminum
Sold in Quantity
Each
Finish
Natural
Carburetor Quantity
One
Intake Section Included
Complete
RPM Range
Idle-5,500
EGR
No
Overall Height
4.25
Intake Manifold Type
Dual Plane | Low Rise
Carburetor Flange Type
Dual: Square and Spread Bore
MFG. Part #
1-147-004
Reviews
Fits well
Rated
by Caleb Chapman on October 06, 2020
Summary:
I was skeptical buying a Chinese made casting but it fits surprisingly well. Good quality. Good machining.
Yes, I recommend this product.
I would buy this product again
Rated
by Dave on September 28, 2020
Summary:
Fit my 350 ci Chevy w/ Vortec heads perfectly
yes
Rated
by lawrence on April 15, 2020
Summary:
perfect
Yes, I recommend this product.
Related Items / Suggested Parts
Speedway Small Block Chevy Intake Gasket Set, Vortec Heads, Standard
Edelbrock 8516 Intake Manifold Bolt Set, Vortec Head, Chevy 5.0/5.7L
Edelbrock 7235 Intake Manifold Gasket Set, Small Block Chevy
Shipping
Combined Shipping:
Please take advantage of the “add to cart” button on each listing to get everything in your cart prior to completing checkout. This will ensure you receive a combined shipping rate on your entire order.
Freight Shipping:
Some products are too large for standard ground delivery and must be shipped via truck freight.
Please contact us via eBay Message for a freight shipping estimate.
When possible, please provide a business or commercial address for delivery to eliminate additional fees.
Please ensure the phone number provided is accurate to avoid delays.
Upon delivery, the recipient must inspect the shipment before the driver leaves as there may be concealed damage; please open the carton to inspect the contents. Any visual damage must be noted on the shipping document BEFORE signing for delivery. Any damage not noted before signing for delivery is the buyer’s responsibility. If damage is found, the shipment may be refused, but please contact us as soon as possible and arrangements will be made to have the product replaced and damaged parts returned.
Tech Support
We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help.
About
Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 69 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.
Return Policy
We want you to be satisfied with your purchase. If within 60 days after you receive your shipment and you are not satisfied, you may return the item for a refund. Refunds will be processed (1-2) days after the item is received by Speedway. All returned merchandise must be in original factory condition with no modifications or alterations. A restocking fee up to 15% may be applied if items are not in new condition.
Returned merchandise must include all packaging materials, warranty cards, manuals, and accessories. If the items being returned need to be repackaged, there will be a repacking charge. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. You must ship orders back PREPAID. WE DO NOT ACCEPT COD SHIPMENTS.
All fiberglass items returned will be subject to a 15% restocking charge. No returns on electrical parts, DVDs, and books unless they are defective. Absolutely no returns on special order or closeout merchandise.
Payment
Accepted Payment Methods - PayPal and major credit cards are accepted.
Terms - Immediate payment is required on all listings.
To view states in which sales tax will apply to your order, please visit the “shipping and payments” tab.
Guarantee
Speedway accepts full responsibility for the accuracy of our listings and product representation. If an egregious shipping or description error occurs, we are happy to assist with a replacement or refund.
Disclaimer
Due to our large inventory and the diversity of our product line, the stock photo used may not be an exact representation of the item you are bidding on. Please read all product information carefully before purchase to avoid any order issues.